Green Hackerz: January 2011

Kernel Stack inpage Error. Beginning dump off Physical Memory

Posted by Karan Singh Rajawat Tags Registry tweak, Windows XP

Kernel Stack inpage error. Beginning dump off Physical Memory...

By Modifying the Registry

In Case that Windows displays a Blue Screen with the following error message:

kernel_stack_inpage error

And/Or a message like this:

***stop:0x0000007(0x000000e.0x00000000.0x9001000)

Beginning dump off physical memory

This error is usually occurs when the swap file Corresponding to the Virtual Memory is corrupted due to a disk block which is failing, an error in memory or a disk Controller Problem. The second Parameter indicates the cause of the error. "0xC000009C and 0xC000016A" indicate both, a bad block on disk. "0xC0000185" indicates a Problem of Termination or SCSI connections, or interrupt conflict between two devices.

The dump of Physical Memory may be due to under-powered device on the Motherboard rendering the System unstable (Blue Screen). One Solution is to find and independent Power Supply for the device (e.g. USB HUB) or use a more Powerful Power Supply.
It may also be a Problem of Memory(two RAM which are incompatible;or different brands).
The Presence of a Virus Boot Sector (boot viruses) may also spawned this type of problem, it is advisable to analyze the computer with an Updated Antivirus.

By Modifying the Registry

Edit the Registry: Start then Run type "regedit"
Go the HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager\Memory Management

*double click the "DisablePagingExecutive" value and enter value 1.

Go to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Memory Management

*double click on the "LargeSystemCache" value and enter 1 as value to increase the size of the Hard-disk Cache.

Note: Before making this change, make a backup of the registry.

Autoexec.nt - Windows 16-bit Subsytem

Posted by Karan Singh Rajawat Tags Operating System, Windows XP

When trying to install a 16-bit windows on your PC, the following error message appears on your screen

"C:\Windows\System32\autoexec.NT. The system file is not suitable for running
MS-DOS and Microsoft Windows applications" is displayed when installing Backup
Exec for Windows Server 9.x

Below are some solutions of how to trouble shoot:

Solution 1

Make a search of the file autoexec.nt under C:\Windows\Repair and copy same in C:\Windows\System32
View the properties of this file and Check the Read-only

Solution 2

You can extract the file autoexec.nt from the Windows XP CD installation
Run the CD from your drive and from MS-DOS prompt, type the command:

expand D:\i386\autoexec.nt_ C:\Windows\System32\autoexec.nt

View the properties of this file and check the read-only mode

Solution 3

Open a notepad and copy the following code:

@ echo off

lh% SystemRoot% / System32 / mscdexnt.exe

lh% SystemRoot% / System32 / redir

lh% SystemRoot% / System32 / dosx

Save the file as "autoexec.nt"(Select the All Files)
Copy it in the folder C:\Windows\System32
Show file Properties and check the Read-Only Mode.

Sharing Conection Between All User Accounts

Posted by Karan Singh Rajawat Tags Hacking, Registry tweak

In order to share an Internet connection between all user accounts of a single computer(Windows XP and Vista), just create a new string value in the registry.

Before any manipulation in the registry, it is recommended to make a backup.
Open the Registry Editor.
Select the Following Key:

HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Winlogon

In the Right part, right click, then New, then String Value.
Right click and select the Rename Option.
Give name KeepRasConnections. Double-clicking on it.
Give it value 1.
Close the publisher of the registry and restart your PC.
Restart Your System.

How to Fix Error Code/Error Message 0x80070002

Posted by Karan Singh Rajawat Tags Registry tweak

Issue:

Sometimes when Starting Your computer, downloading the latest Updates for some Programs or by just Updating Windows or also by just opening a Webpage, you get this error:

[Error Number: 0x80070002] The Website has encountered a problem and cannot display the page you are trying to view. A Problem is Prevent

Error Code

Solution:

The Solution is quite simple, please follow these instructions precisely to proceed:

1) Click Start > Run > Type regedit

Find HKEY_LOCAL_MACHINES > System > ControlSet001 > Services

and look for BITS and Wuauserv .

2) When you find BITS and Wuauserv click on it and check the key ImagePath to make sure itt says:

%SystemRoot%System32svchost.exe -k netsvcs

3) If it's something different, right click the key and click "Modify" copy and paste

%SystemRoot%System32svchost.exe -k netsvcs

If you get an Error saying "Cannot edit ImagePath: Error writing value's new contents."

Right click the folder BITS or Wuauserv (You will most likely have to do both) and select "Permissions"

Select Full Control

Go back to the ImagePath and click Modify again and paste in

%SystemRoot%System32svchost.exe -k netsvcs

Also Check these:

HKEY_LOCAL_MACHINE > System > ControlSet002 > Services (BITS and Wuauserv)

HKEY_LOCAL_MACHINE > System > ControlSet003 > Services (BITS and Wuauserv)

HKEY_LOCAL_MACHINE > System > CurrentControlSet > Services (BITS and Wuauserv)

Notes :

If the problem persists, you just have to use the recovery disk or try restoring the system then update your system with the latest service pack.

[Windows XP, 2000] Update Without Any Registration

Posted by Karan Singh Rajawat Tags Hacking, Registry tweak, Tutorial, Windows XP

Hello GreenHackers....

Today I'm Going to tell you something about Windows Update..

When Updating Your Windows XP or 2000, using Windows Update and that you don't want to allow

Personal Data to be transferred, this can be easily achieved by adding a key to the Registry.

1. Go to Start Menu

2. Click On 'Run'

3. Type regedit/regedt32

4. Open HKEY_LOCAL_MACHINE / Software / Microsoft / Windows NT / CurrentVersion /

5. Check if the Value RegDone doesn't exixt, create it by clicking on Edit / New / String Value

6. Double Click on the Value Created and Type 1 in the Value field (RegDone) . Use OK to Validate.

7. Also Ensure that the - HKEY_LOCAL_MACHINE / Software / Microsoft / Windows / CurrentVerson / Welcome /RegWiz exist, If it is not exist Create it - Edit / New / Key(String Value) and type 1 in the field.

8. Close Registry Editor.

9. Reboot the Machie.

Cleaning Pagefile.sys

Posted by Karan Singh Rajawat Tags Registry tweak, Tutorial, Windows XP

Introduction:

Pagefile.sys is a file that is Currently used by Microsoft Windows to Store Frames of Memory that do not currently fit into Physical Memory. The Paging file allows the Memory Requirement to run all tasks to exceed the amount of Physical Memory and Swapping allows Multiple Processes to run at the same time.

Virtual Memory Extension:

This Technique below allows to extend Your Virtual Memory.

Under Windows XP & 2000, You can Clean the file Pagefile.sys to improve its overall Performance.This can be Performed by Creating and Modifying the REG_DWORD Value from 1 to 0 in the Registry Key

"ClearPageFileAtShutdown"

This is located Under the Key :-

1. Start the Registry Editor (regedt32.exe)

2. Move To HKEY_LOCAL_MACHINE/System/CurrentControlSet/Control/Session Manager/Memory Management

3. Double Click PagingFile.sys

4. There is one Line for each pagefile, the format is :

(e.g. C:\Pagefie.sys 700 700)

5. Now You Right click on Right pane & Create a new DWORD Value "ClearPageFileAtShutdown" without Quote & give it the Value 1.